PA2000 Leased Line Killer
Application Note 1
PBX Linking
None Routed Network
|
|
|
PA2000 Leased Line Killer
Application Note 1
PBX Linking
None Routed Network | ||
|
|
|
|
|
| ||||
|
In this example PABX A and PABX B have their G703 ports set to CLOCK SLAVE. PA2000 A and PA2000 B have their G703 ports set to CLOCK MASTER. The PA2000s are linked by a direct ethernet link : there are no IP routers in the data path. The ethernet link could be a local ethernet service (e.g. BT LES 100) or a wireless LAN link.
PABX A G703 Clock SLAVE
PABX B G703 Clock SLAVE
PA2000 A G703 Clock MASTER IP Address 10.100.1.121
PA2000 B G703 Clock MASTER IP Address 10.100.1.122 | ||||
|
1.Connect the G703 Tx port of PA2000 A to the G703 Rx port of PABX A. 2. Connect the G703 Rx port of PA2000 A to the G703 Tx port PABX A. 3. Connect the G703 Tx port of PA2000 B to the G703 Rx port of PABX B. 4. Connect the G703 Rx port of PA2000 B to the G703 Tx port PABX B. 5. Use the supplied console cable to connect each PA2000 to a serial terminal or PC. The serial settings are 9600 baud, 8 bit data, 1 stop bit and no parity. 6. Connect LAN2 of each PA2000 to the ethernet link. | ||||
|
|
|
Telnet/Terminal Configuration for PA2000 A | ||
|
PA2000:PA2000:Enter Admin Password:password PA2000>config PA2000#main Unit name:PA2000:A LAN2:Address mode:FIXED: LAN2:Port speed:100 Mb/s: LAN2:IP Address:10.100.0.1:10.100.1.121 LAN2:IP Mask:255.255.255.0: LINK:Remote IP Address:0.0.0.0:10.100.1.122 SYNC:Mode:G703-SLAVE:g703m SYNC:G704 Starting timeslot:1 (Normal): SYNC:G704 No timeslots:31 (1.984 Mb/s): PA2000#save Saving configuration... Configuration saved OK. | ||
Browser Configuration for PA2000 A | ||
| ||
|
|
|
Telnet/Terminal Configuration for PA2000 B
PA2000:PA2000:Enter Admin Password:password PA2000>config PA2000#main Unit name:PA2000:B LAN2:Address mode:FIXED: LAN2:Port speed:100 Mb/s: LAN2:IP Address:10.100.0.1:10.100.1.122 LAN2:IP Mask:255.255.255.0: LINK:Remote IP Address:0.0.0.0:10.100.1.121 SYNC:Mode:G703-SLAVE:g703m SYNC:G704 Starting timeslot:1 (Normal): SYNC:G704 No timeslots:31 (1.984 Mb/s): PA2000#save Saving configuration... Configuration saved OK. | ||
|
Browser Configuration for PA2000 B | ||
| ||